Rongwin panel bender bending center adopts a full servo system. Unlike traditional bending machines, the bending machine mold needs to be pressed down against the fixed part of the bending machine, but the bending work is completed by the blade. During the bending process, the plate The material holder fixes the plate. The blade can be bent up or down in different shapes. First, one side is bent outward, and then it is automatically bent inward. These different actions are controlled by the servo electric drive device, which can ensure the highest positioning accuracy in the bending sequence and bring the best bending effect.Industry Application*Food machinery, goods and household appliances *Steel furniture, sheet metal and warehouse *Electrical cabinet *Steel door and frame *Elevators and escalators *Generators *Hospital and laboratory equipment *HVAC *lighting deviceDetailed ImagesControl systemRongwin’s new independent research and development of 9-axis (supporting up to 16-axis concurrency) concurrent linkage full-servo CNC system, seamless action, coherence, global leading work efficiency, independent design of lead-free soldering of hardware circuit boards, surface immersion gold processing technology, stability durable.Machine frameHigh precision, vibration reduction and pressure reduction, wear resistance, no deformationPress brake toolHigh-quality moulds after heat treatment and quenching are more durable.Workpieces Various shapes can be bent without changing moulds.

                                 Rongwin WF67K hydraulic press brake1.Adopt overall welding,after the aging treatment,then adopt overall processing methods to ensure the accuracy and reliability of the whole machine. 2.Hydraulic system adopts Germany Rexroth closed-loop control mode,controlled by the CNC system of Netherlands Delem.The up chamber internal of fuel tank equipped with Roxroth filling valve.The fuel tank of the upper install Rexroth synchronization valve block,grating imported from Germany to detection the balance of slider up and down and the uniformity of pressure,to ensure the synchronization of the slider and bending accuracy.3.Just enter the sheet thickness,width,tensile strength and bending angle,the system will automatically control the pressure and the alider motion,without manual adjustment. 4.Workbench adopts mechanical torsion compensation system,as the mechanical compensation point,so the mechanical compensation effect is far greater than the hydraulic compensation,to achieve effective compensation without blind spots and improve the bending accuracy,to ensure the long-term stability. 5.Back gauge with digital servo motor drive,the full import of precision ball screw drive,and liner guide-oriented,ensure back gauge accuracy and strong repeatability, also according to user needs adopt more complete multiple back gauge axis of the back gauge institutions.6.Energy saving,environmental protection and high efficiency CNC hydraulic press bender.

1, Standard waterjet cutting headA high pressure water jet cutting machine is a tool used for slicing metal and other materials using a jet of water at high velocity and pressure. Featuring a low noise, no pollution, high precision and high reliability, our water jet cutting machine has been used in a variety of applications, including mining, automobile manufacturing, paper manufacturing, food, art and architecture. Water jet machines can be used to cut rubber, foam, plastic, composite, stone, tile, marble, glass and other materials.2, Dynamic 5 cutting headRongwin Dynamic 5 axis water jet cutting machine is specially used to cut marble and granite, it can compensate 10° cutting angle. It is a kind of bevel cutting machines. Due to the water jet cutting is a way of flexible cutting, therefore the product cross section after cutting by the traditional 3 axis water jet cutting machine will have a certain degree of inclination. In order to ensure the accuracy of vertical cutting section, it must reduce the cutting speed. However, our 5 axis water jet cutting machine can ensure the accuracy of vertical cutting section by compensating the cutting angle, without reducing the cutting speed. So that it can be used for cutting parquet stone, the parquet flooring does not need to be polished again, which can save time and labor.3, Max 5 cutting headThis Max 5 waterjet cutter can cut any angle within ±45°, it solves nal problem of water cutting inclination, and achieves 2D/3D cutting easily.4, Cutting head with drilling functionIt perfect combination of automatic drilling assembly and CNC waterjet system can achieve the automatic drilling, automatic feeding, automatic chip removal, pre-drilling before cutting and other functions for smaller pore. It has the ability to complete a one-time cutting drilling, that improve the quality of products, but also improve the efficiency of production.5, Multi-headDouble cutting head or multiple cutting head means have two or more cutting heads on a cutting platform, that at the same time can perform the cutting task with the same track.Mainly for large quantities of small parts,the capacity can be double or more under equivalent energy consumption.High pressure water jet is mainly divided into two types: Abrasive cutting is mainly for metals (such as carbon steel, stainless steel, etc.), non-ferrous metals (such as copper, aluminum, titanium alloy, magnesium alloy, etc.), stone, glass, large thickness composite materials (such as carbon fiber, glass fiber), etc.Pure water cutting is mainly for rubber, foam, cloth, paper, rock wool, food, etc.