QC11Y-8x3200 hydraulic Guillotine Shearing Machine with E21S NC controller

China Manufacturing QC11Y Hydraulic Guillotine Shearing Machine 

Ⅰ、Hydraulic system

  1. Hydraulic valve use Germany Rexroth brand.

2. Main motor use Siemens brand.

3. Oil gear pump use USA Sunny Brand, low noise, good quality.

4．Seal ring use Japan NOK brand, sealing performance, reliable, long life.      

5．There are clear and intuitive oil level and oil temperature display.

6．The machine can continues to work at rated load, hydraulic system steady and do not have leak, high accuracy.

Ⅱ、Electrical Control System

Electrical adopt France Schneider brand；

With movable foot switch operation,

        safety key to start machine,

        machine install emergency button.

Ⅲ、Backgauge

1. Backgauge use ball screw to improve accuracy.

2. Backgauge driven by motor with digital display.

                                           3. Our machine add frequency inverter, X axis can one time positioning,

                      if do not add this part, X axis cannot one time positioning.

Ⅳ、The main structure and properties of the machine

    1.The frame is steel welded structure, have sufficient strength and rigidity, eliminate internal stress and high

     frequency vibration, to ensure the overall accuracy of the fuselage. Has a good rigidity, two cylinders fixed on

    the left and right columns (wallboard). 

2. Shear blades use 6CrW2Si material, heat treatment, high quality materials,

can cutting stainless steel, top blade with four cutting edges, bottom blade with four cutting edges.

3. Blade gap adjustment by hand, shear angle adjustment by button.

         4. Worktable use ball, convenient feed materials, and ensure that the workpiece is not scratched at run time.

Ⅴ、E21S NC controller

Ⅵ、Technical parameter